Conditions of use:
Working medium 40 low point hydraulic oil
Working temperature: working temperature range: -25-80℃, in the load state, the working temperature shall not be higher than 90℃, when the oil temperature is below 100, the pump motor should be warm up under a small load.
Medium viscosity: In order to achieve the best efficiency and service life of the pump motor, the following operating viscosity ranges are recommended.
Best working viscosity 16-36mm 2/s, large allowable viscosity 1000mm/s: small allowable viscosity 10mm/s.
Filter oil accuracy: the best filter oil accuracy is 5-1o μm, the lowest shall not exceed 25μm.
The commonly used pressure of the pump motor should not exceed the rated value, the commonly used working revolution should not exceed the high value, and the continuous work of the high value should not exceed - minutes.
