With the arrival of cold air, people can wear more clothes to stay warm, but what about rotary drilling rigs? What precautions should be taken when operating rotary drilling rigs in cold regions? Get these tips to keep your rotary drilling rig from freezing:#deep drilling machine#
1. Debris Removal#deep drilling machine#
After completing operations, thoroughly clean any water, snow, or mud adhering to wires, connectors, switches, sensors, and their covers. Failure to remove this debris will cause the moisture within to freeze, potentially leading to malfunctions and unexpected breakdowns during subsequent use.
2. Preheating Operation
Perform a complete preheating operation. If the small rotary drilling rig is not fully preheated before operating the control levers, its response will be sluggish, potentially causing unexpected accidents.
3. Hydraulic Oil Circulation
Operate the control levers to circulate the hydraulic oil in the hydraulic system (increasing the system pressure to the set pressure, then releasing the pressure and returning the oil to the hydraulic tank) to warm the hydraulic oil. This ensures good responsiveness and prevents malfunctions.
4. Battery Check
If the battery electrolyte is frozen, do not charge the battery or use any other power source to start the engine. This is dangerous and could cause the battery to catch fire. Before charging the battery or starting the engine with another power source, melt the electrolyte in the battery and check for leaks.#deep drilling machine#
