With the rapid development of my country's national economy in recent years, the role of construction machinery in various engineering construction fields has become increasingly prominent. Rotary drilling rigs, as a mainstream construction machinery product, are gaining increasing attention due to their flexibility, practicality, and high efficiency. They are currently important construction machinery for cast-in-place piles, playing a vital role in transportation, construction, landscaping, mining, water conservancy, and power engineering fields. So, what are the precautions for parking rotary drilling rigs? Below are five points compiled by the editor:#drill units#
1) When stopping a rotary drilling rig, the engine and hydraulic system should be turned off or locked, and the cab should be locked.
(2) The rotary drilling rig should be placed on level ground. If parked on a slope, the tracks should be wedged, and anti-slip devices should be placed on the rig.#drill units#
(3) All components of the rotary drilling rig should be unloaded and stabilized. For example, lower the drill rod and drill bit to the ground; tilt the mast back to a suitable position to increase its stability.
(4) Erecting the mast will reduce the stability of the rotary drilling rig; if the rig is to be parked for an extended period, the mast should be lowered.
(5) The rotary drilling rig must not be parked where a load is suspended.
The above are the precautions for parking a rotary drilling rig. We hope this information is helpful for your use of rotary drilling rigs.#drill units#
