What Causes Gear Oil in The Engine Of A Wheeled Rotary Drilling Rig

What causes the amount of gear oil in the engine to decrease as it is used, and there is also black smoke coming out? Due to the fact that the engine of a wheeled rotary drilling rig burns engine oil, what is the reason for this? The specific reasons for the burning of engine oil need to be combined with the specific situation. Generally, there are several situations, and we hope that customers interested in purchasing a wheeled rotary drilling rig can take a good look. Customers with wheeled rotary drilling rigs need to read carefully.

What causes the gear oil in the engine of a wheeled rotary drilling rig to decrease as it is used

1. Too much oil in the engine: Drain and release excess oil.

2. Oil leakage occurs: locate and repair the oil leak, check if the crankcase ventilator is blocked

3. Oil temperature too high: Check if the oil cooler core is blocked

4. A lot of oil enters the valve chamber: during assembly, it is necessary to ensure that the locating pin is installed in the left screw hole of the rocker arm shaft.

5. Valve guide wear: Check the valve guide clearance, replace the valve guide, and repair the cylinder head if necessary.

6. Severe wear of piston rings: Check and replace with new piston rings.

7. Turbocharger oil seal damage: check for any issues in the intake manifold